Amana - A306005 5mm L/H 70mm High Performance Ditec Carbide Tipped Brad Point Boring Bit Amana - A306005 5mm L/H 70mm High Performance Ditec Carbide Tipped Brad Point Boring Bit

$29.20
SKU: A306005
Bit
  • Amana
  • 5 mm
Description Description

Amana - A306005 5mm L/H 70mm High Performance Ditec Carbide Tipped Brad Point Boring Bit

 

Industrial Brad Point Boring Bits are coated with a non-stick coating for longer lasting cutting edge and tool life. Ditec™ dowel drills feature special grinding and high performance carbide for ultra long-lasting applications. Amana Tool® dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Amana's coating is applied onto the bit at a temperature of 570° F. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge. Amana Tool® dowel drills are coated with PTFE, a non-stick color coating that reduces friction between the chip and the body of the flute while drilling. This improved design results in less heat build-up, a clearer hole, and an extended lifespan of the cutting edge.

 

Specifications

  • Cut Diameter: 5mm
  • Shank: 10mm
  • Cut Length: 35mm
  • Overall Length: 70mm
  • Rotation: Left Hand

Amana - A306005 5mm L/H 70mm High Performance Ditec Carbide Tipped Brad Point Boring Bit

 

Industrial Brad Point Boring Bits are coated with a non-stick coating for longer lasting cutting edge and tool life. Ditec™ dowel drills feature special grinding and high performance carbide for ultra long-lasting applications. Amana Tool® dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Amana's coating is applied onto the bit at a temperature of 570° F. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge. Amana Tool® dowel drills are coated with PTFE, a non-stick color coating that reduces friction between the chip and the body of the flute while drilling. This improved design results in less heat build-up, a clearer hole, and an extended lifespan of the cutting edge.

 

Specifications

  • Cut Diameter: 5mm
  • Shank: 10mm
  • Cut Length: 35mm
  • Overall Length: 70mm
  • Rotation: Left Hand